Square Reeded Marble Toothbrush Holder

Description

Square Reeded Marble Toothbrush Holder

The Square Reeded Marble Toothbrush Holder is a custom marble design for bathroom counters and washroom shelves. It has an open square cup with vertical reeds on all sides, giving the piece a recognisable outline rather than relying on added decoration. The design can be discussed as shown or used to develop a measured proposal. Begin with the available space and intended use so the finished proportions can be planned carefully.

Choosing the size and position

Plan the holder against the straight lines of a shelf, mirror or basin surround, leaving room to lift it from every side. Measure the available counter depth as well as its width. A square footprint can look compact yet still obstruct a tap handle if it is placed too close. Send the widest brush handles and the number you want to store. Electric toothbrush charging bases require a separate arrangement unless specifically included in the quotation.

Suggested size: 9 × 9 × 12 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.

Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for an open square cup with vertical reeds on all sides. A dimensioned drawing can resolve these relationships before the stone is cut.

Marble and finish

The design is shown as white marble with restrained natural veining. The final piece will depend on the block selected for the order, so colour and grain should be confirmed separately. A polished finish reflects light differently from a honed surface. Choose the finish with the surrounding furniture and expected handling in mind.

A closer look at the design

Look at the reeds meeting at a square corner to see how the design is organised. The relationship between this feature and the main body matters more than adding extra ornament. A change in carving depth can make the detail quieter or more visible. If the piece will sit near other stone objects, share their sizes so the proportions can be considered together.

Plan the usable opening and square corners

The important fit measurement is the clear opening between the inside walls. Overall width includes both stone walls and the external reeds. Ask for the internal width in both directions, the cavity depth and the shape of the bottom corners. Those details determine whether your brushes can be removed comfortably, especially if a broad handle sits diagonally across the square opening.

A square cup can coordinate with rectangular trays and straight edged basins, but the corner detail deserves its own review. The close view shows reeds meeting at a corner; ask how those lines will continue around the other sides. A drawing or suitable sample photograph can clarify whether the corners will be rounded, lightly eased or more sharply defined in the final stone.

If the holder will serve two people, test a paper outline with the actual brushes before choosing a larger size. Allow space to grasp one handle without pulling the others out. Enlarging only the exterior may leave less useful room than expected if wall thickness also changes. Agree the usable cavity directly, rather than choosing by the outside dimensions alone.

The underside should also suit the counter it meets. Discuss the contact area and any pads as part of the order, including their effect on overall height. Leave enough surrounding space to remove the holder and wipe beneath it.

Practical points before ordering

Ask for the inner corners and base to be finished so they can be reached during normal cleaning. Confirm whether water is retained or drained and where any drainage would discharge. Do not assume that the illustrated open cup includes ventilation holes, a removable liner or brush dividers. Empty and dry the cavity as part of routine care. Lift the body securely and avoid using the carved corner or thin rim as a handle.

Care and handling

For routine care, use a soft cloth and a marble suitable cleaner when needed. Do not scrub carved edges with an abrasive pad or apply acidic bathroom and kitchen cleaners. Remove spills promptly instead of allowing them to dry into the surface. The maker should advise on any sealer, liner or special finish included in the confirmed order.

For further guidance, see the Natural Stone Institute care guide.

Request a custom quotation

For a useful quotation, send the name Square Reeded Marble Toothbrush Holder, your preferred measurements, the intended position and the delivery postcode. Mention the quantity and any matching pieces you need. RS Marble Craft can then confirm the proposed specification, price, production time, packing and delivery arrangements. Availability and order details are confirmed by quotation rather than inferred from this design page.

Compare the Fluted Round Marble Toothbrush Cup and Slotted Rectangular Marble Soap Dish when choosing your marble bathroom accessories, or send a custom enquiry with the dimensions and pieces you need. Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.