Hexagonal White Marble Coaster Set

Description

Hexagonal White Marble Coaster Set

The Hexagonal White Marble Coaster Set brings a clearly shaped stone detail to tea tables, work desks and guest rooms. Its defining feature is six sided flat coasters with bevelled edges. The design gives you a specific starting point for a custom enquiry, with the overall proportions, usable space and finish agreed before production. RS Marble Craft can discuss the proposed form in relation to the space you have available.

Choosing the size and position

Measure the base of the cups or glasses you normally use, rather than their widest upper rim. Each vessel should sit completely inside the flat usable area. On a small tea table, also check how much space remains for snacks and a serving tray. The number of coasters and any storage holder should be included in your enquiry so the quotation covers the complete set.

Suggested size: 11 × 10 × 1 cm per coaster. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.

Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for six sided flat coasters with bevelled edges. A dimensioned drawing can resolve these relationships before the stone is cut.

Comparing the flat hexagon with the full outside footprint

The six-sided outline needs two measurements: the span across opposite flat sides and the span across opposite corners. Ask the maker to show both, with the bevel width marked separately. A cup base should be compared with the continuous flat area inside that bevel. The widest outside measurement alone does not describe the surface on which the vessel will actually rest.

Draw the proposed flat hexagon on paper and place the bases of your usual cups or glasses within it. Check different orientations and allow some space around the contact area. If a larger centre is required, review the whole hexagonal outline and bevel proportions together rather than adding width only at the corners. Ask for the final dimensions per coaster to be written on the approved drawing.

Discuss the underside finish and any separately supplied protective backing for the table you use. Its material and thickness should be included in the specification if agreed, since the stone outline does not confirm a padded base. State the number of coasters wanted and whether a separate holder is required. Natural grain can vary across pieces, so confirm the preferred relationship between the selected stones without expecting identical veining throughout the set.

Marble and finish

Material selection is part of the custom enquiry. White marble is the proposed starting point, with the actual shade, grain and finish agreed before manufacture. Natural variation is expected, and the rendered surface is only an illustration of that character. Share photographs of nearby stone or furniture if a close visual relationship is important.

A closer look at the design

The close view concentrates on the straight bevel at a hexagonal corner. It helps explain the form at the point where broad surfaces meet smaller carved details. When you discuss the design, mention whether the piece will usually be seen close up or from across the room. That decision can guide the final scale of the profile and the amount of carving.

Practical points before ordering

Stone does not make a coaster spill proof or scratch proof. Wipe tea, coffee and coloured drinks promptly, and check that the underside suits the table finish. Ask about soft backing before ordering. A matching holder is included only when it appears in the confirmed quotation; the illustrated set quantity is indicative.

Care and handling

Dust with a soft clean cloth and remove marks gently using a product suitable for natural marble. Avoid acidic liquids, abrasive pads and strong household cleaners. Wipe spills promptly and dry the surface after light cleaning. Ask the maker about any sealer or special care required for the final finish, especially around carved recesses and joints.

Request a custom quotation

For a useful quotation, send the name Hexagonal White Marble Coaster Set, your preferred measurements, the intended position and the delivery postcode. Mention the quantity and any matching pieces you need. RS Marble Craft can then confirm the proposed specification, price, production time, packing and delivery arrangements. Availability and order details are confirmed by quotation rather than inferred from this design page.

Compare the octagonal channel marble coaster set and triangle soft corner marble coaster set, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.

Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.