Arch Outline Marble Jewellery Box

Description

Arch Outline Marble Jewellery Box

The Arch Outline Marble Jewellery Box brings a clearly shaped stone detail to dressing tables, wardrobes and gift settings. Its defining feature is a flat arch shaped box with a straight rear edge. The design gives you a specific starting point for a custom enquiry, with the overall proportions, usable space and finish agreed before production. RS Marble Craft can discuss the proposed form in relation to the space you have available.

Choosing the size and position

Decide what will go inside before choosing the outside size. Rings, watches, stationery and keepsakes each need a different usable depth. Allow room to lift the lid without hitting a shelf above it. For delicate jewellery, discuss a removable soft liner, because a polished stone interior should not be treated as a padded protective compartment.

Suggested size: 18 × 13 × 7 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.

Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for a flat arch shaped box with a straight rear edge. A dimensioned drawing can resolve these relationships before the stone is cut.

Planning the straight back and curved front

This arch is the horizontal outline of the proposed box: a curved front meeting a straight rear edge. Ask for a top view that shows that relationship clearly, together with the widest part of the cavity and its usable front to back depth. The outside planning dimensions include the stone walls. A rectangular jewellery pouch may fit differently near the curved front than it does beside the straight back, so measure the intended contents before choosing the final size.

Review the lid and body as one matching outline. Ask how the lid will locate when closed, how much usable depth remains underneath it and where it can be lifted comfortably. The arch form does not describe a hinged case or a vertical display stand. If a soft liner or removable organiser is wanted, its curved perimeter and thickness need to be agreed separately so it does not interfere with the seating of the lid.

The straight rear edge can be considered when arranging the box along a shelf or dressing table, while still leaving practical clearance for opening and cleaning. Use a footprint template to check the front curve against nearby accessories. Discuss the final corner treatment where the straight and curved parts meet, then confirm the interior dimensions, edge profile and optional lining on the approved drawing. Any presentation packing for a gift should also be included in the quotation.

Marble and finish

White marble is proposed for the main stone body. Natural veining, small tonal changes and the way the surface catches light vary from block to block. The illustration therefore does not promise an identical grain pattern. Ask to confirm the actual stone selection and whether a honed or polished finish is more suitable for the intended location.

A closer look at the design

The close view concentrates on the curved lid edge. It helps explain the form at the point where broad surfaces meet smaller carved details. When you discuss the design, mention whether the piece will usually be seen close up or from across the room. That decision can guide the final scale of the profile and the amount of carving.

Practical points before ordering

This proposed stone box has a lift off lid unless the final drawing states otherwise. It is not described as airtight, watertight or suitable for medicines and food. Lift the lid separately when moving the box, and support the base with both hands. Keep the lid on a soft surface while the box is open.

Care and handling

Dust with a soft clean cloth and remove marks gently using a product suitable for natural marble. Avoid acidic liquids, abrasive pads and strong household cleaners. Wipe spills promptly and dry the surface after light cleaning. Ask the maker about any sealer or special care required for the final finish, especially around carved recesses and joints.

Request a custom quotation

When enquiring about the Arch Outline Marble Jewellery Box, share the space measurements, intended use, quantity and delivery postcode. Add a photograph of the setting if possible. The quotation should identify the final stone, finish, dimensions, included components, price and delivery arrangements. Confirm these points before placing an order, including any changes you have requested to the illustrated shape.

Compare the four lobe marble jewellery box and cushion lid marble trinket box, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.

Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.