Description
Fan Shaped Marble Dressing Tray
A well chosen stone accessory should suit both its setting and the way it will be used. The Fan Shaped Marble Dressing Tray is proposed for dressing tables, entrance consoles and bedside storage, with a semicircular fan outline with radial grooves giving it its individual character. Its shape is the starting point; the final size, selected marble and finishing details can be discussed with RS Marble Craft before an order is confirmed.
Choosing the size and position
Keep everyday pieces together without covering the whole tabletop. Before choosing a tray, place the bottles, rings or keys you intend to keep on it within a paper outline. Leave enough room to lift each item without touching the rim. A shallow tray is useful for small accessories, while taller bottles need a level base and generous clearance above any raised border.
Suggested size: 28 × 14 × 3 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.
Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for a semicircular fan outline with radial grooves. A dimensioned drawing can resolve these relationships before the stone is cut.
Separating the fan outline from the usable flat area
The semicircular fan outline has a straight side and a broad curved edge, with radial grooves forming part of the proposed design. Ask for a top view showing where those grooves sit relative to the storage area. Confirm the clear flat section separately from the widest outside span. The drawing should make it possible to assess a bottle base or small container against a genuinely level area.
Arrange the intended accessories on a semicircular template and compare layouts with the straight side facing the wall or the room. Keep the radial detail visible where possible rather than covering the whole fan with contents. Rings and small loose pieces may need a removable liner, which should be selected for compatibility with the marble finish. Its final outline and thickness need to match the usable recess.
Review the groove ends and the treatment of the curved rim with the maker. A change in overall width also changes the spacing of the radial pattern, so agree both on the final drawing. Leave enough tabletop around the fan for supporting the body during movement. Include the recess depth, underside contact, finished weight and chosen stone in the quotation, together with any separately supplied protective insert.
Marble and finish
White marble is proposed for the main stone body. Natural veining, small tonal changes and the way the surface catches light vary from block to block. The illustration therefore does not promise an identical grain pattern. Ask to confirm the actual stone selection and whether a honed or polished finish is more suitable for the intended location.
A closer look at the design
Look at the radiating grooves near the rim to see how the design is organised. The relationship between this feature and the main body matters more than adding extra ornament. A change in carving depth can make the detail quieter or more visible. If the piece will sit near other stone objects, share their sizes so the proportions can be considered together.
Practical points before ordering
This is an accessory organiser rather than a carrying tray with a tested load rating. Lift the stone itself from below when moving it. Do not pick it up by a carved corner, an open handle or a narrow decorative edge. Soft pads can be discussed for a polished wooden or glass surface.
Care and handling
Dust with a soft clean cloth and remove marks gently using a product suitable for natural marble. Avoid acidic liquids, abrasive pads and strong household cleaners. Wipe spills promptly and dry the surface after light cleaning. Ask the maker about any sealer or special care required for the final finish, especially around carved recesses and joints.
Request a custom quotation
For a useful quotation, send the name Fan Shaped Marble Dressing Tray, your preferred measurements, the intended position and the delivery postcode. Mention the quantity and any matching pieces you need. RS Marble Craft can then confirm the proposed specification, price, production time, packing and delivery arrangements. Availability and order details are confirmed by quotation rather than inferred from this design page.
Compare the shell rib marble jewellery tray and leaf vein marble accessory tray, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.
Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.
Reviews
There are no reviews yet.