Hexagonal Perforated Marble Dhoop Cup

Description

Hexagonal Perforated Marble Dhoop Cup

If you are planning marble work for pooja shelves and meditation spaces, the Hexagonal Perforated Marble Dhoop Cup offers a distinct form to consider. This design is built around a deep six sided cup with three small round vent holes on each side resting on a flat hexagonal saucer. Rather than choosing by the product photograph alone, use the outline and the suggested measurements to start a practical discussion about your space, the intended use and the finish you prefer.

Choosing the size and position

The ash collecting area should sit under the full length of the chosen incense stick. Check the stick angle, hole diameter and available shelf depth before ordering. A dhoop cup and a stick holder have different requirements, so state clearly which one you use. Keep the surrounding area clear and choose a position where falling ash can be noticed and cleaned easily.

Suggested size: 12 × 11 × 8 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.

Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for a deep six sided cup with three small round vent holes on each side resting on a flat hexagonal saucer. A dimensioned drawing can resolve these relationships before the stone is cut.

Sizing the cup, perforations and hexagonal saucer

The proposed design combines a deep six sided cup with a flat hexagonal saucer. Ask whether the planning width is measured across opposite flat faces or opposite corners, and request both dimensions on the final drawing. The clear interior is smaller after the stone walls are allowed for. Send the dimensions of your intended dhoop vessel and any required heat resistant insert so their fit can be reviewed before the outer cup size is settled.

Each side is illustrated with three small round openings. Review their diameter, height and spacing relative to the base and rim. These perforations are visible features of the proposed form; they do not establish tested airflow or confirm that any particular burning material can be placed directly inside the stone cup. The maker should specify the intended use and insert arrangement for the finished assembly, including the clearances that need to remain around the selected vessel.

Check the full saucer footprint on the intended shelf and ask how the cup will sit on it. The quotation should distinguish the cup, saucer and any separate insert instead of leaving the component count implicit. Allow access to support the assembly and clean the surfaces after cooling. Confirm the selected stone, interior dimensions, perforation layout, saucer size and handling instructions together when reviewing a custom version of this marble incense holder.

Marble and finish

Material selection is part of the custom enquiry. White marble is the proposed starting point, with the actual shade, grain and finish agreed before manufacture. Natural variation is expected, and the rendered surface is only an illustration of that character. Share photographs of nearby stone or furniture if a close visual relationship is important.

A closer look at the design

One useful point to check is the round vent holes in one flat cup wall. It gives the design much of its character and should remain visible in the chosen position. Think about the direction of light and the space around the piece. A clear outline can often be more effective than making every detail deeper, so discuss the intended setting before settling the carving.

Practical points before ordering

Any use with burning incense needs a suitable heat resistant insert where required and confirmation from the maker. The design is not a claim of tested fire safety. Keep smoke away from sensitive items, provide suitable ventilation and supervise use. Let the incense and holder cool before moving or cleaning the piece.

See London Fire Brigade incense guidance for safe use.

Care and handling

For routine care, use a soft cloth and a marble suitable cleaner when needed. Do not scrub carved edges with an abrasive pad or apply acidic bathroom and kitchen cleaners. Remove spills promptly instead of allowing them to dry into the surface. The maker should advise on any sealer, liner or special finish included in the confirmed order.

Request a custom quotation

When enquiring about the Hexagonal Perforated Marble Dhoop Cup, share the space measurements, intended use, quantity and delivery postcode. Add a photograph of the setting if possible. The quotation should identify the final stone, finish, dimensions, included components, price and delivery arrangements. Confirm these points before placing an order, including any changes you have requested to the illustrated shape.

Compare the square recess marble dhoop stand and covered cone marble dhoop stand, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.

Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.