Description
A scalloped pool marble fountain with two broad bowls
A scalloped pool marble fountain makes the outline of the lower enclosure a central part of the design. Two broad circular bowls rise above fluted supports and a square foot, crowned by a rounded bud. Around the centre, an expansive pool follows a curving, lobed plan instead of a simple circle. Vertical reeding and a repeated drop-shaped border connect the surround to the patterned bowl edges, creating detail across both the tall and low parts of the composition.
Understand the different scalloped elements
The bowls carry repeated petal or drop-like carving beneath their broad rims. The pool uses larger curves to shape its overall boundary, giving it a flower-like outline when seen from above. Explore our white marble fountain designs to compare these enclosure shapes. The front view shows the wall relief; the top view explains the lobes around the pedestal. Both matter when coordinating the stonework with paving or surrounding beds.
Plan a landscape around the complete outline
An open court or garden setting gives the pool's changing edge room to be seen. Position seating and pathways after checking the outermost curves, with enough access retained for maintenance. A rigid circular paving border may need adjustment to suit the proposed plan. The dome-top marble fountain offers a different arrangement to compare if you are choosing between crown styles and pool treatments. Assess the composition from the main arrival direction.
Request a plan drawing with the quotation
Tell RS Marble Craft the usable area, desired height and delivery destination in India. Supply a site photograph and explain whether surrounding paving is already fixed. Ask for maximum pool length and width, bowl diameters and assembled height together. Use the fountain design contact page to share your requirements. The images are design visualisations; confirm the number and shape of the pool lobes, marble selection, finish and supply scope in the agreed specification before the final site layout is prepared.
Leave room along every curve
The recessed and projecting parts of the surround should remain reachable for routine care. Consult the Natural Stone Institute care resource for general cleaning guidance. Discuss equipment access before planting or paving closes off the spaces around the pool, especially beside its inward curves.
Frequently asked questions
1. Is the pool circular or shaped with lobes?
The visualisation shows an outer enclosure with broad outward curves and recessed sections, creating a scalloped or flower-like plan. It is different from a plain circular ring. Request a dimensioned top drawing to confirm the exact outline proposed for your project.
2. How many central fountain bowls are shown?
There are two broad bowls above the fluted pedestal, finished with a rounded bud at the top. The surrounding pool is a separate lower enclosure. Make sure the quotation identifies both the central tiers and the shaped pool so the complete arrangement is clear.
3. What creates the repeated pattern beneath the rims?
Rows of drop or petal-like forms decorate the bowl edges and relate to the border on the pool wall. Vertical reeding adds another pattern below. Review the detail view when discussing how prominent the relief should appear at the final stonework dimensions.
4. Which pool measurements should I request?
Ask for the greatest length and width across the outer lobes, plus a plan showing the recessed curves. These measurements establish the shaped footprint. Include the clearance needed for access and the surrounding landscape within your overall site layout.
5. Can this fountain be adapted to existing paving?
Send accurate paving dimensions and photographs before requesting a design adjustment. The pool outline may need to be coordinated with joints, borders and walking routes. Ask for the revised plan to be reviewed as a complete arrangement, including the central pedestal and bowl proportions.
6. Are planting and the background setting supplied?
The background image illustrates a possible location, while the quotation defines the supplied items. Ask for the fountain components, pool, equipment and installation services to be listed separately. Your contractor can use that information to coordinate planting, paving and other work around the feature.
7. What should I clarify about water circulation?
Discuss the desired effect, pump selection, collection arrangement and access for servicing at the agreed scale. Confirm which fittings and connections are included. The shaped pool and two-tier centre need to be considered together when planning how the complete installation will operate and be maintained.
8. How do delivery and material approvals work?
Provide the destination city and access information, then ask about packing, unloading and assembly responsibilities. Discuss the available marble and approval photographs before production. The illustrative images establish the design direction, while the final quotation should record the agreed stone appearance, dimensions and delivery scope.
Reviews
There are no reviews yet.