Oval Handle Slot Marble Tray

Description

Oval Handle Slot Marble Tray

The Oval Handle Slot Marble Tray brings a clearly shaped stone detail to dressing tables, entrance consoles and bedside storage. Its defining feature is an oval tray with open handle slots at opposite ends. The design gives you a specific starting point for a custom enquiry, with the overall proportions, usable space and finish agreed before production. RS Marble Craft can discuss the proposed form in relation to the space you have available.

Choosing the size and position

Keep everyday pieces together without covering the whole tabletop. Before choosing a tray, place the bottles, rings or keys you intend to keep on it within a paper outline. Leave enough room to lift each item without touching the rim. A shallow tray is useful for small accessories, while taller bottles need a level base and generous clearance above any raised border.

Suggested size: 35 × 22 × 4 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.

Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for an oval tray with open handle slots at opposite ends. A dimensioned drawing can resolve these relationships before the stone is cut.

Distinguishing the handle slots from a tested lifting feature

The proposed oval has open handle slots at opposite ends, making the end profile an important part of the design. Ask for the size and position of each opening, the stone thickness around it and the distance to the inner basin. The overall oval length includes both handle areas. Confirm the clear storage length separately rather than assuming the complete outside footprint is usable.

A marble tray with handles may still be intended for stationary accessory display. The openings shown here do not establish a tested load rating or permission to carry a loaded tray by its ends. Ask the maker for the finished weight and handling instructions, and support the stone body from beneath when moving it. Any change to the slot size should be reviewed with the surrounding stone profile.

Arrange the intended dry accessories on a template of the clear oval centre and leave space near both ends. Check the full outside dimensions against the tabletop, including clearance for supported lifting. Discuss edge softness inside the slots, the finish within the basin and suitable underside protection. Record those details with the selected marble and any separate liner in the quotation before confirming the final custom size.

Marble and finish

The proposed material is white marble, subject to confirmation of the selected stone. Natural stone can show pale veins and changes in tone even within one piece. These variations should be considered when matching existing interiors. Discuss the surface finish and request suitable material information before treating the illustration as an exact colour reference.

A closer look at the design

One useful point to check is the carved handle opening. It gives the design much of its character and should remain visible in the chosen position. Think about the direction of light and the space around the piece. A clear outline can often be more effective than making every detail deeper, so discuss the intended setting before settling the carving.

Practical points before ordering

This is an accessory organiser rather than a carrying tray with a tested load rating. Lift the stone itself from below when moving it. Do not pick it up by a carved corner, an open handle or a narrow decorative edge. Soft pads can be discussed for a polished wooden or glass surface.

Care and handling

Dust with a soft clean cloth and remove marks gently using a product suitable for natural marble. Avoid acidic liquids, abrasive pads and strong household cleaners. Wipe spills promptly and dry the surface after light cleaning. Ask the maker about any sealer or special care required for the final finish, especially around carved recesses and joints.

Request a custom quotation

For a useful quotation, send the name Oval Handle Slot Marble Tray, your preferred measurements, the intended position and the delivery postcode. Mention the quantity and any matching pieces you need. RS Marble Craft can then confirm the proposed specification, price, production time, packing and delivery arrangements. Availability and order details are confirmed by quotation rather than inferred from this design page.

Compare the raised foot rectangular marble tray and wave rim marble display tray, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.

Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.