Description
Wave Rim Marble Display Tray
A well chosen stone accessory should suit both its setting and the way it will be used. The Wave Rim Marble Display Tray is proposed for dressing tables, entrance consoles and bedside storage, with a long shallow basin with a gently undulating rim giving it its individual character. Its shape is the starting point; the final size, selected marble and finishing details can be discussed with RS Marble Craft before an order is confirmed.
Choosing the size and position
Keep everyday pieces together without covering the whole tabletop. Before choosing a tray, place the bottles, rings or keys you intend to keep on it within a paper outline. Leave enough room to lift each item without touching the rim. A shallow tray is useful for small accessories, while taller bottles need a level base and generous clearance above any raised border.
Suggested size: 35 × 18 × 4 cm. These are approximate planning dimensions chosen for this design, not measured dimensions of a stocked item. Any usable opening, stone thickness, base and required clearances need to be confirmed on the final specification. Custom sizing can be discussed before manufacture.
Record the overall width, depth and height in your enquiry. If the design has an opening, recess or slot, confirm its usable measurements separately from the outside size. For this design, check the space needed for a long shallow basin with a gently undulating rim. A dimensioned drawing can resolve these relationships before the stone is cut.
Measuring the basin beneath the undulating border
The long shallow basin is surrounded by a gently undulating rim. Ask for both a top view of the clear interior and a side view showing the highest and lowest sections of the border. An overall height or width cannot describe every point along a changing profile. Check the narrowest usable area when deciding whether a particular arrangement of dry accessories will fit.
Use a long paper template of the basin to test bottles, jewellery containers or other small display pieces. Leave retrieval space beside the waves rather than letting objects rest against a raised part of the border. Any separate liner should follow the agreed inner shape and sit within the usable depth. Ask which protective material is appropriate for the selected marble finish and record whether it is included.
Compare the rim from the normal viewing position beside the console or dressing table, since the wave reads differently from above and from the side. Ask the maker to agree the edge softness, underside contact and the transition between low and raised sections. Support the full stone body during movement. Include the usable basin, finished weight, selected stone and handling guidance with the final drawing and quotation.
Marble and finish
The design is shown as white marble with restrained natural veining. The final piece will depend on the block selected for the order, so colour and grain should be confirmed separately. A polished finish reflects light differently from a honed surface. Choose the finish with the surrounding furniture and expected handling in mind.
A closer look at the design
One useful point to check is the rise and fall of the wave rim. It gives the design much of its character and should remain visible in the chosen position. Think about the direction of light and the space around the piece. A clear outline can often be more effective than making every detail deeper, so discuss the intended setting before settling the carving.
Practical points before ordering
This is an accessory organiser rather than a carrying tray with a tested load rating. Lift the stone itself from below when moving it. Do not pick it up by a carved corner, an open handle or a narrow decorative edge. Soft pads can be discussed for a polished wooden or glass surface.
Care and handling
Dust with a soft clean cloth and remove marks gently using a product suitable for natural marble. Avoid acidic liquids, abrasive pads and strong household cleaners. Wipe spills promptly and dry the surface after light cleaning. Ask the maker about any sealer or special care required for the final finish, especially around carved recesses and joints.
Request a custom quotation
For a useful quotation, send the name Wave Rim Marble Display Tray, your preferred measurements, the intended position and the delivery postcode. Mention the quantity and any matching pieces you need. RS Marble Craft can then confirm the proposed specification, price, production time, packing and delivery arrangements. Availability and order details are confirmed by quotation rather than inferred from this design page.
Compare the oval handle slot marble tray and ribbon fold marble display tray, or send a custom enquiry. For general cleaning guidance, see the Natural Stone Institute care advice.
Images are AI generated design illustrations, not photographs of a specific finished or stocked piece. Final dimensions, materials and included fittings are subject to the confirmed quotation.
Reviews
There are no reviews yet.